How to Disable Shield DNS Protection When Troubleshooting Network Connectivity Issues (Individual & Family)

Overview

Some Splashtop Shield protection features use DNS-based filtering to block fraudulent websites and unapproved remote access tools. To provide these features, Shield may modify the device's DNS configuration and route DNS requests through its local DNS resolver.

In certain network environments, this may interfere with existing network or DNS configurations.

If you experience network connectivity issues, DNS resolution problems, or difficulty accessing internal network resources after installing Splashtop Shield, you can temporarily disable Shield's DNS-based protection features to help troubleshoot the issue.

This allows you to keep Splashtop Shield installed and maintain its core antivirus protection while checking whether Shield's DNS handling is contributing to the problem.

This article applies to both Windows and macOS devices.

Common Symptoms

The following symptoms may indicate a DNS-related connectivity issue:

  • Network shares are inaccessible: Internal shared folders, mapped network drives, or file servers cannot be reached, but they may still work when accessed using their IP addresses.
  • Internal websites cannot be opened: Company intranet sites or internal server names fail to resolve, even though public websites are accessible.
  • VPN connectivity issues: Certain internal resources become inaccessible when connected to a corporate VPN.
  • Location-dependent connectivity issues: Network resources work at one office location but cannot be accessed from another location or a remote network.
  • Connectivity improves after uninstalling Shield: Network access returns after Shield is removed from the device.

These symptoms do not necessarily mean that Shield is causing the issue. The following steps can help determine whether its DNS-based protection is involved.


Step 1: Choose How to Change the Settings

This article is for Shield Individual and Family devices. The web console for these plans is my.shield.splashtop.com. Sign in with the corresponding account owner's email when using the web console.

Your situation Where to change the settings
Individual plan Shield app on the affected device — Method A
Family plan, Guardian-managed protection OFF Shield app on the affected device — Method A
Family plan, Guardian-managed protection ON Shield web console, per device — Method B

Family guardians: With Guardian-managed protection OFF, the web console cannot edit the device's protection settings. Either use the Shield app on that device (Method A), or turn on Guardian-managed protection and use Method B. Turning guardian management on changes who controls the settings, so check the existing protection configuration first.


Step 2: Turn Off Scam Protection and Remote Access Protection

Both features must be disabled. In the current Shield configuration, leaving either feature enabled will continue to require Shield's DNS-based protection.

Disabling these features allows Shield to stop using DNS-based filtering for these protections and return DNS handling to the device's normal network configuration.

Note: Disabling these features does not disable Shield's core antivirus engine or malware scanning.

Method A: Shield App on the Device

Use this method for:

  • Individual plan devices
  • Family plan devices with Guardian-managed protection turned off

The changes are made locally on the device and take effect immediately. They do not require the device to contact Splashtop's servers.

On the affected device:

  1. Open the Splashtop Shield app.
  2. On the main page, find Protection features and click Configure.
  3. Open the Anti-Scam settings.
  4. Turn off both of the following features:
    • Scam Protection: OFF
    • Remote Access Protection: OFF

If these settings cannot be changed in the app on a Family device, the family guardian may be managing them. Contact the guardian, or follow Method B if you manage the Family account.

For Individual plans, you can access https://my.shield.splashtop.com/ using the account owner's email if needed, but the DNS protection switches for this method are changed locally in the Shield app.

Repeat these steps on each affected device, then continue to Step 3.

Method B: Shield Web Console (Family Plan, Guardian-Managed)

Use this method for Family plan devices that have Guardian-managed protection turned on. Settings are changed per device.

  1. Sign in to the Shield web console at https://my.shield.splashtop.com/ using the Family account owner’s email address and complete the sign-in verification if prompted.
  2. Go to Devices.
  3. Find the affected device.
  4. Click Update protection settings.
  5. Check that Guardian-managed protection is turned on. If it is off, the settings below cannot be changed here. Either turn it on, or use Method A on the device instead.
  6. In the Anti-Scam section, turn off both of the following features:
    • Scam protection: OFF
    • Remote access protection: OFF
  7. Save the changes.

Repeat these steps for each affected device.

Make sure the device is powered on and connected to the network so it can receive the updated settings. Allow up to 10 minutes for an online device to receive and apply the change. A device that cannot communicate with Splashtop's servers may not receive it. This does not guarantee that DNS cleanup succeeds.

Continue to Step 3.


Step 3: Check the DNS Configuration on the Affected Device

After the change has been applied, check the device's network configuration to see whether its DNS settings have returned to the expected values. Follow the instructions for the device's operating system.

Note: These checks help identify whether the DNS configuration has been restored, but they do not independently confirm that every DNS-related component has stopped operating.

3.1 Windows

Check the Current DNS Servers

  1. Open Command Prompt or PowerShell.
  2. Run the following command:

    ipconfig /all
  3. Find the active network adapter, such as Ethernet or Wi-Fi.
  4. Locate the DNS Servers field.

The DNS servers should normally match those provided by your organization, network administrator, or router.

For example, if your company uses internal DNS servers, you should see those servers listed under the active network adapter.

The DNS configuration should no longer depend on Shield's local DNS resolver.

If the DNS configuration still appears to be managed by Shield, the change may not have been applied successfully, or the original network configuration may not have been fully restored.

Clear the DNS Cache

After checking the DNS settings, run:

ipconfig /flushdns

This clears cached DNS records so Windows can perform fresh DNS lookups using its current configuration.

You should see a message indicating that the DNS resolver cache was successfully flushed.

3.2 macOS

Check the Current DNS Servers

  1. Open Terminal (in Applications > Utilities).
  2. List the network services on the Mac:

    networksetup -listallnetworkservices

    Identify the network service associated with your current connection, such as Wi-Fi or Ethernet. If you are unsure which service is active, check System Settings > Network.

  3. Check the DNS servers configured for that service, replacing Wi-Fi with the service name if it is different:

    networksetup -getdnsservers Wi-Fi

The result should be one of the following:

  • The DNS servers provided by your organization, network administrator, or router, or
  • The message "There aren't any DNS Servers set on Wi-Fi", which means no DNS servers are manually configured for this network service. macOS may obtain DNS settings automatically from DHCP or other network configurations.

The DNS configuration should no longer point to Shield's local DNS resolver.

To see which DNS servers the Mac is actually using, including those provided automatically by the network, you can also run:

scutil --dns

Review the nameserver entries and any domain-specific resolvers shown in the output. If your organization uses a VPN or split DNS, different DNS servers may be used for different domains. Check the relevant DNS servers against your organization's expected network configuration.

If the DNS configuration still appears to be managed by Shield, the change may not have been applied successfully, or the original network configuration may not have been fully restored.

Clear the DNS Cache

After checking the DNS settings, run the following command. You will be asked for an administrator password:

sudo dscacheutil -flushcache; sudo killall -HUP mDNSResponder

This clears cached DNS records so macOS can perform fresh DNS lookups using its current configuration. The command does not display a message when it succeeds.

3.3 If DNS Settings Have Not Returned to Normal

If the DNS configuration still appears incorrect:

  1. Confirm that both Scam protection and Remote access protection are turned off in the place that manages the device's settings (see Step 1).
  2. Method B: Confirm that Guardian-managed protection is ON for the device. Method A: Confirm guardian management is OFF (for Family) and the settings were changed in the local Shield app.
  3. Method B: Make sure the device can communicate with Splashtop's servers to receive the updated settings.
  4. Method B: Allow up to 10 minutes for an online device to apply the update, then verify the policy or device settings have changed. Method A: Local changes should take effect immediately.
  5. If the settings have applied but DNS remains incorrect, contact Splashtop Support. An applied policy does not necessarily mean that DNS settings were fully restored.

Do not manually change your organization's DNS servers, DNS suffix settings, or search domains unless instructed by your network administrator or Splashtop Support.


Step 4: Test Network Connectivity

Once the change has been applied and you have checked the DNS settings, try accessing the network resources that were previously unavailable.

Examples include:

  • Shared network folders and mapped network drives
  • Internal file servers
  • Company intranet websites
  • Resources hosted at other office locations
  • Resources accessed through a corporate VPN
  • Internal applications that rely on company DNS servers

If Network Connectivity Is Restored

If previously inaccessible resources become available after disabling the two Anti-Scam features, this suggests that Shield's DNS-based protection may have contributed to the connectivity issue.

You can leave the features temporarily disabled while you work with Splashtop Support to investigate the issue.

Please contact Support and describe the behavior you observed so we can investigate the underlying cause.

If Network Connectivity Is Not Restored

If the issue continues:

  1. Confirm that the change has been applied on the affected device.
  2. Review the DNS configuration using the instructions in Step 3.
  3. Check whether the affected resources are accessible from other devices on the same network.
  4. Contact Splashtop Support for further troubleshooting.

A continuing connectivity problem does not necessarily rule out a DNS-related issue. Additional network settings or other components may require investigation.


What Happens When These Features Are Disabled?

Disabling the two Anti-Scam features temporarily reduces some of Shield's security protections.

Feature Status
Scam protection — blocking fraudulent and phishing websites Disabled
Remote access protection — blocking unapproved remote access tools Disabled
Antivirus and malware protection Remains enabled
File scanning Remains enabled

Shield's core antivirus and malware scanning capabilities remain active.

However, fraudulent website blocking and unapproved remote access tool blocking provided by these two features will no longer be active.

We recommend using this configuration temporarily for troubleshooting rather than as a permanent security configuration.


Turning the Features Back On

Once the network issue has been resolved, we recommend re-enabling the disabled protection features.

For example, you can restore the original configuration after:

  • Splashtop Support confirms that the underlying issue has been resolved.
  • Your device has been updated to a Shield version that addresses the issue.
  • Your IT administrator determines that the original protection configuration can be safely restored.

To restore the protection settings, turn Scam protection and Remote access protection back on in the same place you turned them off:

  • Method A (Shield app): On each device, go to Protection features > Configure > Anti-Scam and turn both features on.
  • Method B (Family web console): Go to Devices, find each device, click Update protection settings, turn both features on in Anti-Scam, and save.

Still Experiencing Issues?

The Change Does Not Reach the Device (Method B)

Shield devices need to communicate with Splashtop's servers to receive settings changed in the Family web console.

If a device cannot connect because of firewall restrictions, proxy settings, SSL inspection, or other network connectivity problems, the updated settings may not take effect.

Check that the device can access the required Splashtop Shield services.

If immediate recovery is necessary and the settings cannot be updated, you may uninstall Shield from the affected device.

If network connectivity does not recover after uninstalling Shield, contact Splashtop Support for assistance.

The Change Is Applied, but the Network Issue Continues

If both Anti-Scam features are disabled and the device has applied the change, but the issue remains, contact Splashtop Support for further investigation. For guardian-managed Family devices, if the change has not appeared after 10 minutes, first investigate policy delivery; if it has appeared but DNS remains incorrect, investigate DNS restoration.

When submitting a support request, please include:

  • Device information: The affected device name, operating system (Windows or macOS), and version.
  • Plan and method: Your Shield plan (Individual or Family), which method you used, and whether Guardian-managed protection is enabled.
  • Issue description: Which websites, servers, shared folders, or other network resources cannot be accessed.
  • Network behavior: Whether the issue occurs on all networks or only on specific office or VPN connections.
  • DNS comparison: Whether resources work when accessed by IP address instead of hostname.
  • Troubleshooting results: Whether disabling Scam protection and Remote access protection made any difference.
  • DNS configuration: Preferably captured both before and after the change:
    • Windows: the output of ipconfig /all
    • macOS: the output of scutil --dns
  • Shield debug log: Click the Shield icon in the Windows system tray (right-click) or the macOS menu bar, select About, click the button in the bottom-left corner, and save the debug log.

This information will help our Support Team identify the cause and recommend the appropriate resolution.


Summary

For Shield Individual and Family devices, temporarily disabling Scam protection and Remote access protection can help determine whether Shield's DNS-based protection contributes to network problems.

Use the local Shield app for Individual devices and Family devices without guardian management. Use the Family web console for guardian-managed devices. Local changes take effect immediately; web-console changes may take up to 10 minutes on an online device. Verify DNS configuration and re-enable protection after resolving the issue. Core antivirus and file scanning remain enabled.

0 out of 0 found this helpful